Off Loading Truck-to-Tank Fill Point Controller
|
Phillips Pump FPC series fill point controllers are
designed for use with a transport off-loading pump or for fuel drops with a
pumper truck to control the transfer of fuel to above ground storage tanks. With
enclosures suitable for outdoor use, or with explosion proof enclosures for
hazardous areas, our FPC controllers provides the circuitry for monitoring tank
levels and alarm sensing points. Bright LED alarm lights and a loud sounding
horn warn of alarm conditions with contact points provided for controlling
external devices such as solenoid valves, pumps or remote alarm stations. While the controls are usable with a variety of field sensors, our series FPC controller is optimized for high tank level control and assures complete 
safety and minimum installation cost by supplying only low current,
intrinsically safe wiring between controller and tank sensors.With leak detection circuity that prevents the filling of leaking tanks, the fill point controller warns the operator at the tank full 90% level. The system allows the operator to continue filling and/or drain the fill hose up to the 95% level at which time all filling operations are locked out and an alarm is activated. Visual and audible level, leak alarms and indicating lights are also provided. Features:
|
| Part Number | Description |
FPC-10 |
Single tank fill point controller with tank full, tank high level and tank leak alarms |
| FPC-10-DR | Same as above with digital tank level indicator in percent volume |
| FPC-10X | Single tank fill point controller, explosion proof enclosure with tank full, tank high level and tank leak alarms |
| FPC-20 | Dual tank fill point controller with tank selector, tank full, tank high level and tank leak alarms |
| FPC-20-DR | Same as above with digital tank level indicator in percent volume |
| FPC-20X | Single tank fill point controller, explosion proof enclosure with tank selector, tank full, tank high level and tank leak alarms |
Note: Specify Voltage 120 VAC, 1 phase, 60 HZ 208 VAC, 3 phase, 60 HZ
208 VAC, 1 phase, 60 HZ 230 VAC, 3 phase, 60 HZ
230 VAC, 1 phase, 60 HZ 460 VAC, 3 phase, 60 HZ
Note: For Multi tank systems change part number. Example: FPC-30-1/120 is for a three tank, 115 VAC, single phase system. Each multi-tank system requires an optional high level shut off, flow direction control valve .
Option |
Description |
|---|---|
| 1250 | c- Three level float switch for tank high level, pump on & pump off with explosion proof junction box. (Note: to be used with PTC-10R or PTC-20RR series, specified tank size, 1” NPT tank top fitting required) |
| d - Four level float switch for tank high level, pump on, pump off & low level with explosion proof junction box. (Note: to be used with PTC-10S or PTC-20SS series, specified tank size, 1” NPT tank top fitting required) | |
| e - Five level float switch for tank high-high and high level, pump on, pump off & low level with explosion proof junction box. (Note: typically used with PTC-20SR, PTC-30SSR series, specified tank size, 1” NPT tank top fitting required) | |
| 1251 | Continuous reading level gauge, capacitance type with explosion proof junction box (Note: tank size must be specified, 3/4” NPT tank top fitting required, shipped loose with system) |
| View Catalog Cut OnLine |
PHILLIPS PUMP specializes in controlling, monitoring and transferring fuel........
Let us help design a system that works for you