|
| |
|
Pump / Tank
Controllers
|
|
FPC
Series Off Loading Truck-to-Tank Fill Point Controller
Phillips Pump FPC series fill point controllers are designed for use with a transport off-loading pumps or with a pumper trucks to control the transfer of fuel
from the truck to above ground storage tanks. With lockable enclosures suitable for outdoor use, or
available with explosion proof enclosures for hazardous areas, and used is
conjunction with our multi-level
float switches, continuous read tank level transmitters and leak detection
switches, our FPC series controllers provide the circuitry necessary for monitoring tank levels and alarm sensing points.
|  |
|
Pump-To-Tank
Controllers
Phillips Pump PTC series tank level
controllers and alarm consoles are designed to automatically operate pumps
to control the level of a liquid in a tank. Used is conjunction with our multi-level
float switches, continuous read tank level transmitters and leak detection
switches, these controllers are designed for single or dual tank use in
the filling or the emptying of generator sub-base tanks, day tanks, oil
water separators etc.
|
|
|
Phillips Pump TA series tank level and alarm consoles are designed for use with
above ground tanks and sensing devices that transmits alarm conditions by opening or closing switch contacts. While the controls are usable with a variety of
our multi-level
float switches, continuous read tank level transmitters and leak detection
switches, our series TA alarm console is optimized for alarm and/or tank level indication and assures complete safety and minimum installation cost by requiring only low current, intrinsically safe wiring between console and alarm switch.
|
|
|
| |
|