Phillips Pump LLC

Phillips Pump TA series tank level and alarm consoles are designed for use with any above ground tank(s) and sensing devices that transmits alarm conditions by opening or closing switch contacts. While the controls are usable with a variety of field sensors, our series TA alarm console is optimized for alarm and/or tank level indication and assures complete safety and minimum installation cost by requiring only low current, intrinsically safe wiring between console and alarm switch.

Housed in a NEMA 4X enclosure, the circuitry provides for monitoring just alarm or for fuel level and alarm sensing points. Bright LED alarm lights and a loud sounding horn warn of alarm conditions. Dry contacts are provided for communication with building management systems or for controlling external devices such as valves, or remote alarm stations.

Operation: The TA controller transmits a signal to a tank, sump, piping or any other type of sensing switch (float & leak switches). If an alarm condition is sensed, the TA alarm console will energize the audible horn and appropriate warning indicator light. The alarm will remain until the condition is cleared however the horn may be silenced by pressing the reset button. At any time, an operator may test the alarm circuit by pressing the test button.

• Power on indication
• Alarm warning lights
• Audible alarm with reset button
• Push button test
• Interfaces with Phillips Pump’s multilevel float, leak, high & low level and other switches for alarm
• Our TA-DR series provides tank level indication in percent volum with 4-20 mA output for building management interface
• 115 VAC, single phase standard, other voltages available

TA-11

1

Single alarm