PUMP/TANK LEVEL CONTROLLERS
Phillips Pump PTC series tank level controllers and alarm consoles are designed for use with any tank and sensing device that transmits an alarm condition by opening or closing switch contacts. While the controls are usable with a variety of field sensors, our series
PTC controller is optimized for level control and assures complete safety and minimum installation cost by requiring only low current, intrinsically safe wiring between console and tank switch.Housed in a NEMA 1 enclosure, the circuitry provides for monitoring fuel level and alarm sensing points. Bright incandescent alarm lights and a loud sounding horn warn of alarm conditions. Dry contacts are provided for controlling external devices such as valves, or remote alarm stations. Operation: Phillips PTC controller transmits a signal to a tank mounted level switch. When the switch senses a fuel requirement condition the switch transfers and the PTC circuit energizes the pump circuit. If an alarm condition is sensed, the PTC will energize the audible horn and appropriate warning indicator light. The light will remain on after silencing the horn by pressing the reset button. At any time, an operator may test the alarm circuit by pressing the test button. Each controller includes:
|
Part Number |
Control Function |
Description |
|---|---|---|
PTC-10S |
Simplex (1) Supply Pump
|
For operating one supply (tank fill) pump, up to a 3/4 HP single phase motor with tank high level, low level and tank leak alarms (Requires Option # 1250d) |
| PTC-10S-DR | Same as above with tank level indication (Requires Option # 1251) |
|
|
|
|
| PTC-20SS |
Duplex (2) Supply Pump
|
For operating two supply (tank fill) pumps with automatic pump alternation, up to a 3/4 HP single phase motor with tank high level, low level and tank leak alarms (Requires Option # 1250d) |
| PTC-20SS-DR | Same as above with tank level indication (Requires Option # 1251) | |
PTC-10R |
Simplex (1) Return Pump
|
For operating one return (tank empty) pump, up to a 3/4 HP single phase motor with tank high level and tank leak alarms (Requires Option # 1250c) |
| PTC-10R-DR | Same as above with tank level indication (Requires Option # 1251) |
|
| PTC-20RR |
Duplex (2) Return Pump
|
For operating two return (tank empty) pumps with automatic pump alternation, up to a 3/4 HP single phase motor with tank high level with tank leak alarms (Requires Option # 1250d) |
| PTC-20RR-DR | Same as above with tank level indication (Requires Option # 1251) | |
| PTC-20SR | Single
Supply Pump (1)
& Single Return (1) Pump |
For operating one supply (tank fill) and one return (tank empty) pump, up to a 3/4 HP single phase motor with high-high & high level, low level with tank leak alarms. (Requires Option # 1250e) |
| PTC-20SR-DR | Same as above with tank level indication (Requires Option # 1251) | |
| PTC-30SSR | Duplex (2) Supply Pump & Simplex (1) Return Pump | For operating duplex (two) supply (tank fill) pumps with automatic alternation and one return (tank empty), up to a 3/4 HP single phase motor with tank high-high, high, low level with tank leak alarms. (Requires Option # 1250e) |
| PTC-30SSR-DR | Same as above with tank level indication (Requires Option # 1251) |
Option |
Description |
|---|---|
| 1250 | c- Three level float switch for tank high level, pump on & pump off with explosion proof junction box. (Note: to be used with PTC-10R or PTC-20RR series, specified tank size, 1” NPT tank top fitting required) |
| d - Four level float switch for tank high level, pump on, pump off & low level with explosion proof junction box. (Note: to be used with PTC-10S or PTC-20SS series, specified tank size, 1” NPT tank top fitting required) | |
| e - Five level float switch for tank high-high and high level, pump on, pump off & low level with explosion proof junction box. (Note: typically used with PTC-20SR, PTC-30SSR series, specified tank size, 1” NPT tank top fitting required) | |
| 1251 | Continuous reading level gauge, capacitance type with explosion proof junction box (Note: tank size must be specified, 3/4” NPT tank top fitting required, shipped loose with system) |
| View Catalog Cut OnLine |
PHILLIPS PUMP specializes in controlling, monitoring and transferring fuel........
Let us help design a system that works for you