|
| |
|
Pump / Tank
Controllers
For pre-configured pumping system solutions, Phillips Pump offers fully
integrated, engineered, factory packaged, skid mounted pumping systems.
They are the perfect answer to meet today's high performance and
reliability standards found in commercial, industrial and institutional
applications. With a wide range of flow rates, each system provides a
reliable means of fuel transfer to oil burners, day tanks and emergency
generator fueling systems.
Phillips Pump manufactures a variety of pump set styles with an array
of options that can be selected to meet your specific design requirements
|
|
Single
Pump Systems
Skid
Mounted
Enclosed
Phillips Pump FPC series fill point controllers are designed for use with a transport off-loading pumps or with a pumper trucks to control the transfer of fuel
from the truck to above ground storage tanks. With lockable enclosures suitable for outdoor use, or
available with explosion proof enclosures for hazardous areas, and used is
conjunction with our multi-level
float switches, continuous read tank level transmitters and leak detection
switches, our FPC series controllers provide the circuitry necessary for monitoring tank levels and alarm sensing points.
|  |
|
Duplex
Pump Systems - Skid Mounted
Phillips Pump PTC series tank level
controllers and alarm consoles are designed to automatically operate pumps
to control the level of a liquid in a tank. Used is conjunction with our multi-level
float switches, continuous read tank level transmitters and leak detection
switches, these controllers are designed for single or dual tank use in
the filling or the emptying of generator sub-base tanks, day tanks, oil
water separators etc.
|
|
|
Phillips Pump TA series tank level and alarm consoles are designed for use with
above ground tanks and sensing devices that transmits alarm conditions by opening or closing switch contacts. While the controls are usable with a variety of
our multi-level
float switches, continuous read tank level transmitters and leak detection
switches, our series TA alarm console is optimized for alarm and/or tank level indication and assures complete safety and minimum installation cost by requiring only low current, intrinsically safe wiring between console and alarm switch.
|
|
|
Phillips Pump TA series tank level and alarm consoles are designed for use with
above ground tanks and sensing devices that transmits alarm conditions by opening or closing switch contacts. While the controls are usable with a variety of
our multi-level
float switches, continuous read tank level transmitters and leak detection
switches, our series TA alarm console is optimized for alarm and/or tank level indication and assures complete safety and minimum installation cost by requiring only low current, intrinsically safe wiring between console and alarm switch.
|
|
|
| |
|